GPU overheating
Hi,
Ive recently built my first PC using PC partpicker. Specs: i7 9700, 3.6GHz 8 core processor EVGA RTX 2080Ti 11gb GPU ROG Strix Z390-e Mobo Corsair H100 V2 liquid CPU cooler. Ive got 2 fans blowing into the case from above. The cpu cooler fans blowing through the radiator into the case from the front. A third fan at bottom front blowing into the case and 1 fan at rear of case blowing out. Ive overclocked the gpu and am running the gpu fans at 100% while gaming on ultra settings. Problem is when I put the tempered glass cover on the Fractal meshify case the gpu overheats. It sits around 71 to 75 C when the case cover is off and running ultra settings on tomb raider. Any advice on what I can change or do to lower the temp of this gpu would be much appreciated. Thanks Gav |
12:14pm 09/07/19 Permalink
What temp is it hitting with the panel on? when you say its overheating is it actually throttling your clock speed when you have GPU-Z open?
You definitely shouldn't be needing to run you fans at 100%.. If your getting mid 70s at 100% fan speed with your panel off then that would suggest to me a cooling issue with your GPU not so much a case air flow issue. For perspective my overlocked 1080ti runs high 70s to low 80s when gaming at around 73% fan speed. |
03:13pm 09/07/19 Permalink
What temp is it hitting with the panel on? when you say its overheating is it actually throttling your clock speed when you have GPU-Z open? It was up around 80c when the cover was on. I dont know what temp when the computer crashed. The whole system shut down on a safety I assume. Total power off except power to the mobo. I may have fixed the issue. I went into the BIOS and set the case fans to turbo curve and its running a lot cooler at 70C with panel on and running superposition benchmark. Ill keep playing with the fans to get the least amount of noise and temp. Thanks |
12:08pm 10/07/19 Permalink
